Model Number Indication
Standard Specification
| Cylinder Diameter (mm) | 32 | 40 | 50 | 63 | 80 | 100 |
| Fluid used | Air | |||||
| Operation mode | Double acting | |||||
| Pressure range | 0.05~1.0MPa | |||||
| Ambient and fluid temperature | With magnetic switch:-10℃~+60℃,Without magnetic switch:-10℃~+70℃. | |||||
| Rod End Threads | Internal thread(standard),External thread(optional) | |||||
| Piston Speed | 50~500mm/s | |||||
| Cushioning | Standard rubber cushion | |||||
| Stroke tolerance (mm) | +1.4 0 | |||||
| *Feeding oil | Not required | |||||
| Installation form | Screw holes at both ends (standard) | |||||
| Pipe caliber Rc | 1-8 | 1-4 | 3-8 | |||
| *If lubrication is required, use Turbine 1 oil ISOVG32。 | ||||||
Example of ordering
①Required cylinder bore:32, stroke:125, double-action built-in magnetic ring type, internal thread at both ends, external pattern at ends, rubber cushioning. Correct model:CDQ2A32-125DCM
Travel/magnetic switch options
| Cylinder Diameter (mm) | Standard Travel (mm) | Magnetic Switch Models | ||
| Track Installation | Direct Installation | |||
| 32 | 125,150, 175,200, 250,300 | A73 | M9N M9P M9B | |
| 40 | ||||
| 50 | ||||
| 63 | ||||
| 80 | ||||
| 100 | ||||
| *Magnetic switch specifications and characteristics can be found in the series of magnetic switches. The mounting part model is BQ-2.*Wire length indication symbols: No symbol -0.5m, L-3m. Example: A73, A73L. | ||||
External dimension drawing (mm)
● Rod end female thread–CQ2A/CDQ2A
():Dimensions of magnetic switches other than D-A7 are shown in parentheses.
| Cylinder Diameter (mm) | Travel ( mm ) | A | B | C | D | E | G | H | I | J | K | L | M | O | P | Q | R | S | Thg | U | Z |
| 32 | 125~200 250,300 | 62.5 | 45.5 | 13 | 16 | 45 | 5 | M8×1.25 | 60 | 4.5 | 14 | 17 | 34 | M6×1.0 | RC1/8 | 12.5 | 10 | 58.5 | 22 0-0.052 | 31.5 | 14 |
| 40 | 72 | 55 | 13 | 16 | 52 | 5 | M8×1.25 | 69 | 5 | 14 | 17 | 40 | M6×1.0 | RC1/8 | 14 | 10 | 66 | 28 0-0.052 | 35 | 14 | |
| 50 | 73.5 | 55.5 | 15 | 20 | 64 | 5 | M10×1.5 | 86 | 7 | 17 | 18 | 50 | M8×1.25 | RC1/4 | 14 | 14 | 80 | 35 0-0.062 | 41 | 19 | |
| 63 | 75 | 57 | 15 | 20 | 77 | 5 | M10×1.5 | 103 | 7 | 17 | 18 | 60 | M10×1.5 | RC1/4 | 16.5 | 18 | 93 | 35 0-0.062 | 47.5 | 19 | |
| 80 | 86 | 66 | 21 | 25 | 98 | 5 | M16×2.0 | 132 | 6 | 22 | 20 | 77 | M12×1.75 | RC3/8 | 19 | 22 | 112.5 | 43 0-0.062 | 57.5 | 26 | |
| 100 | 97.5 | 75.5 | 27 | 30 | 117 | 5 | M20×2.5 | 156 | 6.5 | 27 | 22 | 94 | M12×1.75 | RC3/8 | 23 | 22 | 132.5 | 59 0-0.074 | 67.5 | 26 |
●Rod end external thread
| Cylinder Diameter (mm) | C | H | L | X |
| 32 | 20.5 | M14×1.5 | 38.5 | 23.5 |
| 40 | 20.5 | M14×1.5 | 38.5 | 23.5 |
| 50 | 26 | M18×1.5 | 43.5 | 28.5 |
| 63 | 26 | M18×1.5 | 43.5 | 28.5 |
| 80 | 32.5 | M22×1.5 | 53.5 | 35.5 |
| 100 | 32.5 | M26×1.5 | 53.5 | 35.5 |
