Model Number Indication

Standard Specification

Bore (mm)		10	15		25
Fluid		Air
Action type		Double acting
Guaranteed pressure		15kgf/cm²{1.5MPa}
Maximum operating pressure		9.9kgf/cm²{0.99MPa}
Minimum operating pressure		1.5kgf/cm²{0.15MPa}		1kgf/cm²{0.1MPa}
Ambient and Fluid Temperature		5~60℃
piston speed	With adjusting bolt	30~200mm/s
	With hydraulic shock absorber	30~500mm/s
Buffering		Hydraulic shock absorber (optional)
Maximum load		1kgf	3kgf		6kgf
*Lubrication		Not required
Bearing		Slide Bearing
Non-rotation accuracy		±0.1°	±0.04°		±0.02°
Tube diameter Rc(PT)		M5×0.8			1/8
*If lubrication is required, use Turbine 1 oil ISOVG32.

Example of ordering

1)Required cylinder bore:15, stroke:75, basic type, correct type:CX2N15-75

2)Required cylinder bore: 25, stroke: 200, built-in magnetic ring type (cylinder body mounted), with 2 hydraulic shock absorbers.Correct model:CDBX2N25-200B

Stroke/magnetic switch options

Bore(mm)	Standard Stroke(mm)	**Magnetic switch
		Cylinder body installation		End Plate Installation
10	25,50,75,100	D-E73AL D-E80ALD-E76AL		D-A72L D-A73L D-A76L D-A80L D-F79L D-J79L
15	25,50,75,100, 125,150,175,200	D-A72L D-A76L D-A79L	D-A73L D-A80L D-J79L
25

Theoretical Power Table

Model	Piston rodDiameter (mm²)	PistonPressure area (mm²)	Working pressure (kgf/cm²)
			2	3	4	5	6	7	8	9
CX2N10	6	1.01	2.0	3.0	4.0	5.0	6.0	7.0	8.0	9.0
CX2N15	8	2.07	4.1	6.2	8.3	10.4	12.4	14.5	16.6	18.6
CX2N25	14	5.97	11.9	17.9	23.9	29.9	35.8	41.8	47.8	53.7

External Dimension Drawing (mm)

● CX2N10

Model	F	G	L	P	Q	R	S	SS	Z	With adjusting bolt	With hydraulic shock absorber
										ZZ	ZZ
CX2N10-25	9.5	19.5	38	48	103	28	27	67	94	132	176
CX2N10-50	20	30	63	52	153	32	52	92	144	182	226
CX2N10-75	25	35	88	67	203	47	77	117	194	232	276
CX2N10-100	25	35	113	92	253	72	102	142	244	282	326

● CX2N15·25

Model	A	B	C	φD	E	F	φG	φH	I	J	φK	L	M	N	O	P	Q	R	S	SL	sS	T	φU	φV	W	X	Y	z	bolt with adjustable stroke  ZZ	hydraulic shock absorber ZZ
CX2N15-25□	40	41	50	8	20	24.5	φ8 flat bottom reaming depth 4	Φ4.3 through – hole	M5×0.8 Seal Plug	M5×08 thread depth 10	φ5H7Deep6	37	11	22	21	20	106	M5×0.8TubeDiameter	27	15.5	69	M8× 1.0	Φ7.6 flat – bottomed counterbore 4.4	Φ4.2 through – hole	10	10	55	96	128	178
CX2N15-50□						24.5						62				45	156		52		94							146	178	228
CX2N15-75□						27						87				65	206		77		119							196	228	278
CX2N15-100□						27						112				90	256		102		144							246	278	328
CX2N15-125□						39.5						137				90	306		127		169							296	328	378
CX2N15-150□						52						162				90	356		152		194							346	378	428
CX2N15-175□						64.5						187				90	406		177		219							396	428	478
CX2N15-200□						77						212				90	456		202		244							446	478	528
CX2N25-25□	67	67	79	14	35	28.5	Flat bottom reaming depth 5	Φ5.2 through – hole	1/8cork	M6×1.0Threaddepth12mm	φ6H7Depth8	44	18	34	32	25	125	1/8TubeDiameter	27	20.5	82	M10 × 1.0	Φ9.5 flat – bottomed counterbore 5.4	Φ5.2 through – hole	16	16	84	109	153	203
CX2N25-50□						31						65				45	175		52		107							159	203	253
CX2N25-75□						33.5						90				65	225		77		132							209	253	303
CX2N25-100□						33.5						115				90	275		102		157							259	303	353
CX2N25-125□						46						140				90	325		127		182							309	353	403
CX2N25-150□						58.5						165				90	375		152		207							359	403	453
CX2N25-175□						71						190				90	425		177		232							409	453	503
CX2N25-200□						83.5						215				90	475		202		257							459	503	553