Model Number Indication
Standard Specification
Bore( mm ) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | 50 | 63 |
Fluid Used | Air | ||||||||
Operation method | Double acting | ||||||||
Maximum operating pressure | 0.7MPa | ||||||||
Minimum operating pressure | 0.18MPa | ||||||||
Ambient and fluid temperature | -10~60℃(but not frozen) | ||||||||
Piston speed | 50~400mm/s | ||||||||
*Cushioning | Rubber cushioning on both ends | ||||||||
Stroke tolerance mm | 0~250:,251~1000:。4,1001~: | ||||||||
**Feed oil | Unnecessary | ||||||||
Tube caliber | M5×0.8 | Rc1/8 | Rc1/4 | ||||||
Mounting position | limitless |
*If lubrication is required, use Turbine 1 oil ISOVG32.
Stroke/magnetic switch options
Bore | Standard Stroke(mm) | Maximum stroke(mm) | Magnetic Switch Models (rail mounted, slide rule type only) | |
Basic type | Slide rule type | |||
6 | 50,100,150,200 | 300 | 300 | A73 |
10 | 50,100,150,200,250,300 | 500 | 500 | |
15 | 50,100,150,200,250, 350,400,450,500 | 一 | 750 | |
20 | 100,150,200,250,300, 350,400,450,500,600, 700,800 | 一 | 1000 | |
25 | 一 | 1500 | ||
32 | ||||
40 | 100,150,200,250,300, 350,400,450,500,600, 700,800,900,1000 | 一 |
*Magnetic switch specifications and characteristics can be found in the Magnetic Switch Series.
Wire length indication symbol: no symbol -0.5mm, L-3m, Z-5m Example: A73, A73L
Theoretical output force of cylinder and magnetic couple holding force
Bore ( mm) | Model | Holding forceH-shape(N) | Magnetic coupling holding forceCorresponding pressure(Mpa) | Maximum operating pressure when stopping in the middle of the stroke(Mpa) |
φ6 | CY1□6H | 19.6 | 0.7 | 0.55 |
φ10 | CY1□10H | 53.9 | 0.7 | 0.55 |
φ15 | CY1□15H | 137.3 | 0.79 | 0.65 |
φ20 | CY1□20H | 231 | 0.76 | 0.65 |
φ25 | CY1□25H | 362.8 | 0.75 | 0.65 |
φ32 | CY1□32H | 588.4 | 0.74 | 0.65 |
φ40 | CY1□40H | 921.8 | 0.75 | 0.65 |
Maximum load and stroke (CY1S)
If the center of gravity of the load and the slider is at the same point, the relationship curve between force and stroke is as shown in the figure below. When using the cylinder, try to make the center of gravity of the load and the slider as close as possible. If it is impossible, please contact our company.
External Dimension (mm)
● Basic type (C□Y1S6-10)
Model | Travel range | φD | φd | A | φB | C | HT | G | GP | H | HA | HG | HP | HS | T | J×K | L | LD | M |
CY1S6 CDY1S6 | ~300 | 7.6 | 8 | 6 | 6.5 | 3 | 17 | 5 | 32 | 27 | 19 | 8 | 26 | 8 | 10 | M4×0.7×6.5 | 40 | 3.5 | 6 |
CYS10 CDY1S10 | ~300 | 12 | 10 | 7.5 | 8 | 4 | 18 | 6.5 | 40 | 34 | 25.5 | 12 | 33 | 14 | 12.5 | M5×0.8×9.5 | 45 | 4.3 | 6 |
Model | MM | NN | (N) | P | *PA | PB | PW | QW | Q | S | TT | Z | W |
CY1S6 CDY1S6 | M4×0.7 | M8×1.0 | 10 | M5×0.8 | 25 | 25 | 50 | 16 | 52 | 42 | 16 | 68 | 46 |
CY1S10 CDY1S10 | M4×0.7 | M8×1.0 | 9.5 | M5×0.8 | 25 | 38 | 60 | 24 | 60 | 47 | 20.5 | 80 | 58 |
*Dimension center of PA is the same as dimension center of L.
● C□Y1S15·20•25•32•40
Model | Stroke range φD | φd | A | φB | C | HT | G | GP | H | HA | HG | HP | HSD | T | J×K | L | LD | M | |
COY1S15 | ~750 | 16.6 | 12 | 7.5 | 9.5 | 5 | 21 | 6.5 | 52 | 40 | 29 | 13 | 39 | 15 | 12.5 | M6×1.0×9.5 | 60 | 5.6 | 8 |
COY1S20 | ~1500 | 21.6 | 16 | 10 | 9.5 | 5.2 | 20 | 8.5 | 62 | 46 | 36 | 17 | 45 | 25.5 | 16.5 | M6×1.0×9.5 | 70 | 5.6 | 10 |
COY1S25 | ~1500 | 26.4 | 16 | 10 | 11 | 6.5 | 20 | 8.5 | 70 | 54 | 40 | 20 | 53 | 53 | 16.5 | M8×1.25×10 | 70 | 7 | 10 |
COY1S32 | ~1500 | 33.6 | 20 | 12.5 | 14 | 8 | 24 | 9.5 | 86 | 66 | 46 | 24 | 64 | 27 | 18.5 | M10×1.5×15 | 85 | 8.7 | 12 |
C□Y1S40 | ~1500 | 41.6 | 25 | 12.5 | 14 | 8 | 25 | 10.5 | 104 | 76 | 57 | 25 | 74 | 30 | 20.5 | M10×1.5× 15 | 95 | 8.7 | 12 |
Model | MM | NN | (N) | P | *PA | PB | PW | QW | Q | S | TT | Z | W |
C口Y1S15 | M5×0.8 | M8×1.0 | 7.5 | M5×0.8 | 30 | 50 | 75 | 30 | 75 | 62 | 22.5 | 97 | 72 |
C口Y1S20 | M6×1.0 | M10×1.0 | 9.5 | 1/8 | 40 | 70 | 90 | 38 | 90 | 73 | 25.5 | 115 | 87 |
C口Y1S25 | M6×1.0 | M14×1.5 | 11 | 1/8 | 40 | 70 | 100 | 42 | 90 | 73 | 25.5 | 115 | 97 |
C口Y1S32 | M8×1.25 | M20×1.5 | 11.5 | 1/8 | 40 | 75 | 122 | 50 | 110 | 91 | 28.5 | 138 | 119 |
C□Y1S40 | M8×1.25 | M20×1.5 | 10.5 | 1/8 | 65 | 105 | 145 | 64 | 120 | 99 | 35.5 | 155 | 142 |
Note) Magnetic switch can also be mounted on the A side.