Standard Specification

Bore (mm)	6	10	15
Fluid to be used	Air
Operation type	Double Action
Maximum operating pressure MPa	0.7
Minimum operating pressure MPa	0.12	0.06
Ambient and Fluid Temperature	Non-magnetic switch:-10℃ with magnetic switch:-10℃~60℃
Cushioning	Rubber cushioning on both ends
Piston Speed	50~500 mm/s
Travel tolerance mm	+1.0 0
*Lubrication	Not required
Tube diameter	M5×0.8

Stroke/magnetic switch options

Bore  ( mm )	Standard Stroke(mm)	Retracted position	Extended position
6	5,10,15	150	400
10	5,10,15	250	610
15	5,10,15	450	1100

External Dimension Drawing (mm)

● CJPB·CDJPB

Bore (mm)	A A’		B	B’	φD	F	F’	GA	GB H		J	K	MM	NN	R	S					W	Z					with magnetic switch
																5st	10st	15st	20st	30st		5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	C	E	P
6	7	9	14	14	3	8	6.5	6	6	17	6	8	M3×0.5	M10×1.0	7	30.5	35.5	40.5	45.5	–	3	47.5	52.5	57.5	62.5		16.5	10.5	20
10	10	12	15	17	5	8	6.5	6	7	20	7	8	M4×0.7	M12×1.0	8	30.5	35.5	40.5	45.5	55.5	4	50.5	55.5	60.5	65.5	75.5	20	13	21
15	12	14	20	19	6	10	8.5	6	7	24	9	8	M5×0.8	M14×1.0	10	30.5	35.5	40.5	45.5	55.5	5	54.5	59.5	64.5	69.5	79.5	24.5	15.5	23

Bore (mm)	A A’		B	B’	φD	F	F’	GA	GB		H	J	K	MM	NN	R	S					W	Z					with magnetic switch
																	5st	10st	15st	20st	30st		5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	5st 10st15st 20st30st	C	E	P
6	7	9	14	14	3	8	6.5	6	6	17		6	8	M3×0.5	M10×1.0	7	30.5	35.5	40.5	45.5	–	3	47.5	52.5	57.5	62.5		16.5	10.5	20
10	10	12	15	17	5	8	6.5	6	7	20		7	8	M4×0.7	M12×1.0	8	30.5	35.5	40.5	45.5	55.5	4	50.5	55.5	60.5	65.5	75.5	20	13	21
15	12	14	20	19	6	10	8.5	6	7	24		9	8	M5×0.8	M14×1.0	10	30.5	35.5	40.5	45.5	55.5	5	54.5	59.5	64.5	69.5	79.5	24.5	15.5	23

Bore (mm)	Foot Mount								Flange
	part NO.	LH	LT	LZ	LX	X	Y	ΦLC	FT	FX	FY	FZ	φFC
6	CP-L006	11	1.6	28	20	6.5	10.5	3.4	1.6	24	16	32	3.4
10	CP-L010	13	1.6	33	24	7	12	4.5	1.6	28	18	37	4.5
15	CP-L015	18	2.3	43	30	10	16.5	4.5	2.3	36	22	49	5.5

● Trunnion Mount

Bore (mm)	Trunnion Mount Part NO.	S					Z					ZZ						R
		5st    10st		15st	20st	30st	5st	10st	15st	20st	30st	5st	10st	15st	20st	30st
6	CP-T006	35.5	40.5	45.5	50.5	一	48.5	53.5	58.5	63.5	一	52.5	57.5	62.5	67.5		一	7
10	CP-T010	40.5	45.5	50.5	55.5	65.5	54	59	64	69	79	60.5	65.5	70.5	75.5		85.5	8
15	CP-T015	42	47	52	57	67	58	63	68	73	83	66	71	76	81		91	10

Bore(mm)	A	A’	B	C	φD	E	GA	GB	H	J	K	MM	NN	Q	T	φCD	CH	CK	CT	CU	CX	φCY	CZ
6	7	9	14	16.5	3	10.5	6	11	17	6	8	M3×0.5	M10×1.0	18.5	20.4	3	16	4	12	1.6	18	3.4	26
10	10	12	15	20	5	13	6	17	20	7	8	M4×0.7	M12×1.0	20.5	23.9	5	20	6.5	13.5	1.6	24	4.5	33
15	12	14	20	24.5	6	15.5	6	18.5	24	9	8	M5×0.8	M14×1.0	28	31.7	6	25	8	17	2.9	29	5.5	42

Bore (mm)	Part NO.	Y-type double elbow joints										Elbow joint pin						Cylinder body nut
		A1	B1	φND H10	L1	L2	MM	U1	NX	R1	R2	φDd9	L	φd	￡	M	t	d	H	B	C
6	Y-P006	5	6	3	12	3.5	M3×0.5	5	3	5	4	3	9	2.85	62	0.75	0.65	M10×1	3	14	16.2
10	Y-P010	6.5	10	5:	16	5.5	M4×0.7	7	5	8	6.3	5	13.6	4.8	10.2	1	0.7	M12×1	3	17	19.6
15	Y-P015	7	12	6	19	7	M5×0.8	9	6	10	7.8	6	15.8	5.7	12.2	1	08	M14×1	4	19	21.9

Bore (mm)	I-Type single-toggle											Trunnion pin							Rod – end nut
	Part NO.	A1	B1	φND H10	L1	L2	MM	U1	NX	R1	R2	Part NO.	φDd9	L	φd	￡	m	t	Part NO.	d	H	B    C	B    C
6	I-P006	5	6	3	12	3.5	M3×0.5	5	3	5	4	CT-P006	3	20.4	285	17.6	0.75	0.65	NTP-006	M3×0.5	1.8	55	6.4
10	I-P010	6.5	10	5:	16	5.5	M4×0.7	7	5	8	63	CT-P010	5	23.9	48	20.5	1	0.7	NTP-010	M4×0.7	2.4	7	8.1
15	I-P015	7	12	6	19	7	M5×0.8	9	6	10	7.8	CT-P015	6	31.7	57	28.1	1	0.8	NTP-015	M5×0.8	3.2	8	9.2