Model Number Indication

Features
●Easy to install
Shared through-hole and threaded holes on both ends
Standard Specification
Cylinder Diameter (mm) | 12 | 16 | 20 | 25 |
Fluid used | Air | |||
Action type | Double-action, single-action: spring-loaded push-back/spring-loaded push-out | |||
Guaranteed pressure | 1.5MPa{15.3kgf/cm} | |||
Maximum operating pressure | 1.0MPa(10.2kgf/cm²} | |||
Ambient and fluid temperature | -10℃~+60℃ | |||
Rod End Threads | Female thread (standard), Male thread (optional) | |||
Cushioning | Non | |||
Use piston speed | 50~500mm/s | |||
Stroke Tolerance | +1.0 0 | |||
*Slip | Not required | |||
Installation | Through Hole, Female threads on both ends (shared) | |||
Receiver Bore | M5×0.8 |
Example of ordering
①Required cylinder bore: 16, stroke: 10, double-action, rod end female thread, correct model: CQSB16-10D
②Required cylinder bore: 25, stroke: 50, double-action built-in magnetic ring type, rod end male thread, rubber cushion. Correct model:CDQSB25-50DCM
Travel/magnetic switch options
Cylinder diameter (mm) | Standard Travel | Magnetic Switch Models | |
Double action | single action | Pit mounting type | |
12 | 5,10,15 20,25,30, | 510 | M9N M9B M9P |
16 | |||
20 | 5,10,15,20,25 30,35,40,45,50 | 510 | |
25 | |||
*Magnetic switch specifications and characteristics can be found in the Magnetic Switch Series. Note) Long stroke is available.Wire length is indicated by notation: No notation -0.5m,L-3m,Z-5m. Example: M9N,M9NL. |
External dimension drawing (mm)
● φ16 Double action/single action (spring return)
● φ16 Single-action (spring-loaded)
● Rod end male thread (double action/single action: spring return)
Applicable cylinder bore (mm) | C | H | L | X |
12 | 9 | M5×0.8 | 14 | 10.5 |
16 | 10 | M6×1.0 | 15.5 | 12 |
20 | 12 | M8×1.25 | 18.5 | 14 |
25 | 15 | M10×1.25 | 22.5 | 17.5 |
● Rod end male thread (single action: spring loaded)
Applicable cylinder bore (mm) | C | H | L | X | |
5 ST | 10 ST | ||||
12 | 9 | M5×0.8 | 19 | 24 | 10.5 |
16 | 10 | M6×1.0 | 20.5 | 25.5 | 12 |
20 | 12 | M8×1.25 | 23.5 | 28.5 | 14 |
25 | 15 | M10×1.25 | 27.5 | 32.5 | 17.5 |
● Double-single action common size table
Applicable cylinder bore(mm) | Basic Type | |||||||||||||
C | D | E | H | I | K | M | N | OA | OB | RA | RB | T | Q | |
12 | 6 | 6 | 25 | M3×0.5 | 32 | 5 | 15.5 | 3.5 | M4×0.7 | 6.5 | 7 | 4 | 0.5 | 7.5 |
16 | 8 | 8 | 29 | M4×0.7 | 38 | 6 | 20 | 3.5 | M4×0.7 | 6.5 | 7 | 4 | 0.5 | 7.5 |
20 | 7 | 10 | 36 | M5×0.8 | 47 | 8 | 25.5 | 5.4 | M6×1.0 | 9 | 10 | 7 | 1 | 9 |
25 | 12 | 12 | 40 | M6×1.0 | 52 | 10 | 28 | 5.4 | M6×1.0 | 9 | 10 | 7 | 1 | 11 |
● Double-action size table
ST=Travel
Applicable cylinder bore (mm) | Travel Range (mm) | Basic Type | Built-in magnetic ring type | |||||
A | B | F | L | Q | A | B | ||
12 | 5~30 | 20.5+st | 17+st | 5 | 3.5 | 7.5 | 25.5+st | 22+st |
16 | 5~30 | 20.5+st | 17+st | 5 | 3.5 | 7.5 | 25.5+st | 22+st |
20 | 5~50 | 24+st | 19.5+st | 5.5 | 4.5 | 9 | 34+st | 29.5+st |
25 | 5~50 | 27.5+st | 22.5+st | 5.5 | 5 | 11 | 37.5+st | 32.5+st |
● Single action: spring return
ST=Travel
Applicable cylinder bore (mm) | Travel Range (mm) | Basic Type | Built-in magnetic ring type | ||||||||
A | B | F | L | A | B | ||||||
5ST | 10ST | 5ST | 10ST | 5ST | 10ST | 5ST | 10ST | ||||
12 | 510 | 25.5 | 30.5 | 22 | 27 | 5 | 3.5 | 30.5 | 35.5 | 27 | 32 |
16 | 25.5 | 30.5 | 22 | 27 | 5 | 3.5 | 30.5 | 35.5 | 27 | 32 | |
20 | 29 | 34 | 24.5 | 29.5 | 5.5 | 4.5 | 39 | 44 | 34.5 | 39.5 | |
25 | 32.5 | 37.5 | 27.5 | 32.5 | 5.5 | 5 | 42.5 | 47.5 | 37.5 | 42.5 |
● Single action: spring press-out
Applicable cylinder bore (mm) | Travel Range (mm) | Basic Type | Built-in magnetic ring type | |||||||||
A | B | L | Q | A | B | |||||||
5 ST | 10 ST | 5 ST | 10 ST | 5 ST | 10 ST | 5 ST | 10 ST | 5 ST | 10 ST | |||
12 | 510 | 30.5 | 40.5 | 22 | 27 | 8.5 | 13.5 | 7.5 | 35.5 | 45.5 | 27 | 32 |
16 | 30.5 | 40.5 | 22 | 27 | 8.5 | 13.5 | 7.5 | 35.5 | 45.5 | 27 | 32 | |
20 | 34 | 39 | 24.5 | 29.5 | 9.5 | 14.5 | 9 | 44 | 49 | 34.5 | 39.5 | |
25 | 37.5 | 42.5 | 27.5 | 32.5 | 10 | 15 | 11 | 47.5 | 52.5 | 37.5 | 42.5 |