Products

Home
Products
Pneumatic Solenoid Valve (3 port-2 way) 3V200 Series

Pneumatic Solenoid Valve (3 port-2 way) 3V200 Series

Acting Pattern:pilot-operated
Operating Pressure Range:0.15-0.8MPa
Max Withstand Pressure:1.5MPa
Temperature Requirement:-20~70℃
Voltage Tolerance Range:AC±15%,DC±10%
Protection Rating: IP65(DIN40050)
Body Material:Aluminum Alloy
Valve Body Material:Brass
Seals:VITON,NBR

Share to:

Product Code

3V	1	10	06		NO	A	I	G
Specification Code 3V:3-port 2-way	Series Code 1:Series 100 2:Series 200 3:Series 300	Electric Control 10:double position& single control 20:double position& double control	Port Size M5:M5 06:PT1/8 08:PT1/4 10:PT3/8	Acting Pattern W:externally piloted	Initial State NC:normally closed NO:normally open	Standard Voltage A:AC220V B:DC24V C:AC110V E:AC24V F:DC12V	Wiring Method unmarked:D IN socket type I:lead-out type	Thread unmarked:PT T:NPT G:G

Standard Specification

Model	3V210-06	3V220-06	3V210-08	3V220-08
Working medium	Air (filtered by 40μm or more)
Action mode	Pilot type
*Pipe caliber	Inlet = Outlet = PT1/8		Inlet = Outlet = PT1/4
Effective cross-sectional area	14.0mm²(Cv=0.78)		16.0mm²(Cv=0.89)
Number of positions	Three for two
**Lubrication	Not necessary.
Operating pressure range	0.15~0.8MPa(21~114psi)
Guaranteed pressure	1.5MPa(215psi)
Working temperature ℃	-20~70
Body material	Aluminum

*NPT and G teeth are available;
**If there is oil lubrication, it must not be stopped in the middle of the process, and it is recommended that the lubricant is ISOVG32 or the same grade of oil.

Electrical Performance Parameters

Project	Specific parameters
Standard Voltage	AC220V、AC110V、AC24V、DC24V、DC12V
Operating Voltage Range	AC:±15% DC:±10%
Power consumption	AC:3.5VA DC:3.0W
Protection class	IP65(DIN40050)
Heat Resistance Grade	Level B
Connection type	DIN Socket Type, Outlet Type
Excitation time	Below 0.05 sec
*Maximum operating frequency	5 times/second

*Maximum operating frequency is no-load condition.

Flow Rate Characteristics

Internal Composition

NO.	Name	NO.	Name
1	Fixed iron piece	12	Bottom cover
2	Hand pin	13	Round head screws
3	Spring	14	Wear ring
4	Shaped 0-ring	15	Piston
5	Guide body	16	Countersunk head screws
6	Profile 0 order	17	0 order
7	Shaft core	18	Movable Iron
8	0-ring	19	Coil
9	Body	20	Fixed Nut
10	Spring	21	Screwdriver
11	Stop Leakage Pad