Products

Home
Products
Pneumatic Solenoid Valve (3 port-2 way) 3V300 Series

Pneumatic Solenoid Valve (3 port-2 way) 3V300 Series

Acting Pattern:pilot-operated
Operating Pressure Range:0.15-0.8MPa
Max Withstand Pressure:1.5MPa
Temperature Requirement:-20~70℃
Voltage Tolerance Range:AC±15%,DC±10%
Protection Rating: IP65(DIN40050)
Body Material:Aluminum Alloy
Valve Body Material:Brass
Seals:VITON,NBR

Share to:

Product Code

3V	1	10	06		NO	A	I	G
Specification Code 3V:3-port 2-way	Series Code 1:Series 100 2:Series 200 3:Series 300	Electric Control 10:double position& single control 20:double position& double control	Port Size M5:M5 06:PT1/8 08:PT1/4 10:PT3/8	Acting Pattern W:externally piloted	Initial State NC:normally closed NO:normally open	Standard Voltage A:AC220V B:DC24V C:AC110V E:AC24V F:DC12V	Wiring Method unmarked:D IN socket type I:lead-out type	Thread unmarked:PT T:NPT G:G

Standard Specification

Model	3V310-08	3V320-08	3V310-10	3V320-10
Working medium	Air (filtered by 40μm or more)
Action mode	Pilot type
*Pipe caliber	Inlet = Outlet = PT1/4		Inlet = Outlet = PT3/8
Effective area	25.0mm²(Cv=1.39)		30.0mm²(Cv=1.67)
Number of positions	3 port-2 way
**Lubrication	Not necessary.
Operating pressure range	0.15~0.8MPa(21~114psi)
Guaranteed pressure	1.5MPa(215psi)
Working temperature ℃	-20~70
Body material	Aluminum

*NPT and G teeth are available;
**If there is oil lubrication, it must not be stopped in the middle of the process, and it is recommended that the lubricant is ISOVG32 or the same grade of oil.

Electrical Performance Parameters

Project	Specific parameters
Standard Voltage	AC220V、AC110V、AC24V、DC24V、DC12V
Operating Voltage Range	AC:±15% DC:±10%
Power consumption	AC:3.5VA DC:3.0W
Protection class	IP65(DIN40050)
Heat Resistance Grade	Level B
Connection type	DIN Socket Type, Outlet Type
Excitation time	Below 0.05 sec
*Maximum operating frequency	5 times/second

*Maximum operating frequency is no-load condition.

Flow Rate Characteristics

Internal composition

No.	Name	Serial number	Name	No.	Name
1	Fixed iron piece	8	O Order	15	Piston
2	Hand pin	9	Body	16	Countersunk Head Screws
3	Spring	10	Spring	17	O-ring
4	Shaped O-ring	11	Stop Leak Pads	18	Movable Iron
5	Guide Body	12	Bottom cover	19	Coil
6	Profile O-ring	13	Round head screws	20	Fixed Nut
7	Shaft core	14	Wear ring	21	Screwdriver