Products

Home
Products
Standard Cylinder (rod type) SC Series (Φ32-Φ100)

Standard Cylinder (rod type) SC Series (Φ32-Φ100)-1

Standard Cylinder (rod type) SC Series (Φ32-Φ100)

● The standard cylinder of our company:.
● The piston seal adopts heterogeneous bi-directional sealing structure with compact size and oil storage function.
● It is a tie rod type cylinder, the front and rear covers are connected with the aluminum tube cylinder body by struts, with good reliability.
● Compared with ISO15552 standard cylinder, the length of SC series cylinder is small with the same bore.
● Cylinder buffer adjustment is smooth.
● Customers can choose to use cylinders of various specifications and cylinder mounting accessories.
● Selection of high-temperature resistant sealing materials can ensure the normal operation of the cylinder at 150 ℃.

Share to:

Ordering code

Standard Specifications

Bore(mm)		32	40	50		63		80	100
Motion mode		Double-action type
Working medium		Air (filtered by 40μm filter)
Fixedtype	SC Series	Basic Model FA Model FB Model CA Model CB Model LB Model TC Model TCM1 Model
	SCD,SCJ Series	Basic type F A type L B type T C type T C M 1 type
Pressure range		0.1~1.0MPa(14~145Psi)
Guaranteed pressure resistance		1.5MPa(215Psi)
Working temperature ℃		-20~80
Operating speed range mm/s		30~800
Stroke tolerance range		0~250 +1.0 0			251~1000 +1.4 0		1001~1500 +1.8 0
Buffer type		Adjustable buffer
Buffer stroke mm		21						28	29
*Pipe caliber		PT1/8	PT1/4			PT3/8			PT1/2

*The receiver tooth type is available in NPT and G teeth.

Stroke

Model	Bore (mm)	Standard Stroke	Maximumstroke	allowablestroke
SC SCD SCJ	32	25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500	11000	2000
	40	25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000	1200	2000
	50		1200	2000
	63		1500	2000
	80		1500	2000
	100		1500	2000

Note: Within the maximum stroke range, if the stroke ≥ 1600mm, for non-standard processing, other special stroke, please contact the company.

Cylinder theoretical output table

Bore(mm)		32		40		50		63		80		100
Outer diameter of piston rod(mm)		12		16		20		20		25		25
Actuating type		Double action type		Double action type		Double action type		Double action type		Double action type		Double action type
Actuating type		Pressure side	Pull side	Pressure side	Pull side	Pressure side	Pull side	Pressure side	Pull side	Pressure side	Pull side	Pressure side	Pull side
Pressure area(mm²)		804	690	1256	1055	1963	1649	3117	2803	5026	4536	7853	7362
AirPressure(MPa)	0.1	80.4	69.0	125.6	105.5	196.3	164.9	311.7	280.3	502.6	453.6	785.3	736.2
	0.2	160.8	138.0	251.2	211.0	392.6	329.8	623.4	560.6	1005.2	907.2	1570.6	1472.4
	0.3	241.2	207.0	376.8	316.5	588.9	494.7	935.1	840.9	1507.8	1360.8	2355.9	2208.6
	0.4	321.6	276.0	502.4	422.0	785.2	659.6	1246.8	1121.2	2010.4	1814.4	3141.2	2944.8
	0.5	402.0	345.0	628.0	527.5	981.5	824.5	1558.5	1401.5	2513.0	2268.0	3926.5	3681.0
	0.6	482.4	414.0	753.6	633.0	1177.8	989.4	1870.2	1681.8	3015.6	2721.6	4711.8	4417.2
	0.7	562.8	483.0	879.2	738.5	1374.1	1154.3	2181.9	1962.1	3518.2	3175.2	5497.1	5153.4
	0.8	643.2	552.0	1004.8	844.0	1570.4	1319.2	2493.6	2242.4	4020.8	3628.8	6282.8	5889.6
	0.9	723.6	621.0	1130.4	949.5	1766.7	1484.1	2805.3	2522.7	4523.4	4082.4	7067.7	6625.8

External dimension drawing (mm)

● SC

Bore	A	AB	AC	AD	AE	B	D	DA	E	EA	F	FA	H	K	KA	KB	M	MA	P	PA	PB
32	140	47	93	27.5	27.5	45	12	32	M10×1.25	22	17	6	10	M6×1	9.5	33	28	15	1/8″	14	5.5
40	142	49	93	27.5	27.5	50	16	34	M12×1.25	24	17	7	14	M6×1	9.5	37	32	15	1/4″	15	6
50	150	57	93	27.5	27.5	62	20	42	M16×1.5	32	23	8	17	M6×1	9.5	47	38	15	1/4″	17	8.5
63	153	57	96	27.5	27.5	75	20	42	M16×1.5	32	23	8	17	M8×1.25	9.5	56	38	15	3/8″	15	9.5
80	182	75	107	33	33	94	25	54	M20×1.5	40	26	10	22	M10×1.5	11.5	70	47	21	3/8″	19.5	10
100	188	75	113	33	33	112	25	54	M20×1.5	40	26	10	22	M10×1.5	11.5	84	47	21	1/2″	16.5	11
125	236	92	144	40	40	138	32	60	M27×2.0	45	41	13.5	27	M12×1.75	16	110	60	32	1/2″	20	14
160	312	132	180	50	50	180	40	94	M36×2.0	72	55	18	36	M16×2.0	15	140	65	38	1/2″	20	15
200	310	125	185	50	50	220	40	74	M36×2.0	50	55	18	36	M16×2.0	15	175	75	50	1/2″	20	15

● SCD,SCJ

Bore	A1	A2	B	C	E	Z	J	K
32	187	182	47	93	32	27	6	M10×1.25
40	191	185	49	93	34	28	7	M12×1.25
50	207	194	57	93	42	29	8	M16×1.5
63	210	197	57	96	42	29	8	M16×1.5
80	257	238.5	75	107	54	35.5	10	M20×1.5
100	263	244.5	75	113	54	35.5	10	M20×1.5

Note: 1. The dimensions of magnetized and non-magnetized models are the same.
2. Dimensions not labeled are the same as those of the SC standard type.