Standard Specifications
| Bore diameter(mm) | 12 | 16 | 20 | 32 | 40 | 50 |
| Action type | Double acting, double acting (built-in spring), single acting (spring press-out) | |||||
| Rod End Shape | Cylindrical type, flat column type,Roller Type | Cylindrical type, flat column type, roller type,Lever type roller type (built-in buffer) | ||||
| Fluid used | Air | |||||
| Maximum operating pressure | 1.0MPa | |||||
| Ambient and Fluid Temperature | Without magnetic switch: -10~+70℃ (but not frozen)With magnetic switch: -10~+60℃ (but not frozen) | |||||
| Cushioning | Rubber cushioning on both ends | |||||
| Stroke length tolerance (mm) | +1.4 0 | |||||
| Oil feed | Not required (for oiling, use Turbine 1 oil ISO VG32) | |||||
| Mounting form | Through hole, screw holes at both ends | |||||
| Connection caliber | M5x0.8 | Rc1/8 | ||||
| Quick-change coupling connection | 一 | Φ6/Φ4 | Φ8/Φ6 | |||
Stroke/Magnetic Switch Model List
| Bore | Standard Stroke (mm) | Magnetic Switch Models |
| 12 | 10 | M9B M9P M9N |
| 16 | 1,015 | |
| 20 | 10,15,20 | A73Mounting part:Φ16~Φ20:BQ1;Φ32~Φ50:BQ1 |
| 32 | ||
| 40 | 20,25,30 | |
| 50 |
After the model number of the magnetic switch, attach the marking indicating the length of the wire.
No symbol -0.5m, L-3m, Z-5m Example: A73, A73L
The application ranges of various rod end shapes
● Cylindrical Type,Flat Column Type,Roller Type
Lateral Load and Operating Pressure
● Cylindrical Type,Flat Column Type,Roller Type
Outline Dimension Drawing(mm)
| Bore (mm) | B | N | O | R |
| 20 | 45 | 5.5 | M6×1 | 10 |
| 32 | 48 | 5.5 | M6×1 | 10 |
| 40 | 52.5 | 5.5 | M6×1 | 10 |
| 50 | 54 | 6.6 | M8×1.25 | 14 |
Note 2) The size shown in the above figure is that of the piston rod when it is extended.
| Bore(mm) | B | N | O | R |
| 20 | 45 | 5.5 | M6×1 | 10 |
| 32 | 48 | 5.5 | M6×1 | 10 |
| 40 | 52.5 | 5.5 | M6×1 | 10 |
| 50 | 54 | 6.6 | M8×1.25 | 14 |
| Bore (mm) | A | B | C | D | E | F | G | H | I | J | K | L | M | N | φO | P | Q | R | S | T | U | V | W | X | Z | |
| 32 | 87 | 48 | 15 | 20 | 45 | 7.5 | 8 | 39 | 60 | 4.5 | 32 | 3 | 34 | 5.5 | 9Deep7 | 1/8 | 20 | 10 | 18 | 36 | 31.5 | 20 | 58.5 | 8 | 14 | |
| 40 | 105.5 | 52.5 | 18 | 25 | 52 | 8 | 10 | 53 | 69 | 5 | 41 | 4 | 40 | 5.5 | 9Deep7 | 1/8 | 24.5 | 10 | 24 | 44 | 35 | 28 | 66 | 9 | 14 | |
| 50 | 107 | 54 | 21 | 25 | 64 | 8 | 10 | 53 | 86 | 7 | 50 | 4 | 50 | 6.6 | 11 Deep8 | 1/8 | 24.5 | 14 | 24 | 56 | 41 | 28 | 80 | 9 | 19 | |
Note 2) The size shown in the above figure is that of the piston rod when it is extended.
